Home
Guide
Map
Ask Eddie
Search
Reference
Forum
About

A rope, plastic bag, weed or a bit of timber caught on the propeller stops a boat dead. If the motor revs but the boat isn't going anywhere, it's almost always something around the prop. Switch off and tilt the motor up, or get in the water, to look. If nothing is there, the cause may be a spun hub instead. Fishing line wound in behind the prop is also the most common way to damage the prop shaft seals, so it's worth checking for.

In this video Adrian and I go out on a dive job: a boat had picked up its mooring line around the prop and was hanging off it. First I tie a temporary line from the boat to the mooring's ground chain, so the boat is secure and the line on the prop can be slackened. Cutting the line would have been easy, but then there's no mooring, so I untangle it underwater, put the mooring back on the boat and take the temporary line off. If you're lucky, running the prop the opposite way to how it picked up the rope can spin it off.

Fitting a rope cutter

On Renko's prop shaft I fit a Prop Protector, a blade that cuts any rope the prop picks up. Once a rope is around your prop you're not going anywhere, so I think it's worth having.

Timber on the prop

Out on the river after heavy rain, the motor revs but the boat isn't going anywhere. I switch off and trim the motor up, and a piece of timber floats away.