An old outboard's paint wears off the lower unit, and the cowling gets knocked about against piles and other boats. Repainting is mostly preparation: getting it clean, filling the damage and sanding. The painting itself is the easy part.
In this video a Johnson/Evinrude lower unit has come back from sandblasting, showing the pitting along its leading edge. I build up a chipped edge with the TIG welder and file it back, hammer out bent sections, skim the pits with metal epoxy and sand it back. Then I mask the threads and the spot where the anode sits, so it touches bare metal, and spray light coats of primer and the BRP colour, sanding between coats. A lower unit's paint has a hard life, so I talk about what I'd do differently: a tougher two-part paint, a foam-pad orbital sander instead of a flap disc, and more coats of epoxy.
The Green Machine's cowling, which I'd planned to vinyl wrap in carbon fibre before deciding paint suited the boat better. I take off the stapled rubber seal and the latches, get the old decals off with a heat gun and a blade, then sand it and spray it matt black, with the air intake cover in green and its embossed Yamaha lettering painted in by hand. New decals and the seal, glued on with Sikaflex, finish it off.
