Something lost over the side, like an anchor and its chain, can often be found again, but in silty, murky water you won't see it. Find a likely target with side scan sonar, mark it, then search the spot by diving or by dragging a grapple across it. Marking your tracks on the chartplotter takes the guesswork out of searching an area properly.
In this video I look for a lost stainless anchor in the river. On the side scan, a mooring's chain rises up into the water column towards its buoy, so a mark on the bottom that doesn't is a likely target. I drop Renko's anchor on the waypoint, dive down the anchor line, and clip a search line to the anchor to do circular searches around it. In zero visibility a visual search is pointless, so I go back for the metal detector, which also gets a hit off Renko's own anchor chain on every circle. I don't find it, probably because the anchor landed a little away from the mark.
Dragging a grapple
Rigging a homemade mooring grapple with a length of chain in front and behind, so it drags through the mud, and towing it across where the anchor's chain should be lying. It needs more scope to stay on the bottom, and a sonar scan afterwards shows faint drag tracks, so it needs more weight too. The track is saved in OpenCPN to run again. Next time, drop a weighted buoy with a styrofoam float near the bottom: it shows up on the sonar, so you can see how close you are to the target.
A marker buoy that adjusts to the depth
Rigging a buoy to mark a target found on sonar. The rope runs from the main weight through a pulley under the buoy to a sliding sash weight, so one 16 metre rope covers depths from about 8 to 16 metres, and the buoy can't get away even if something comes undone. A search line clips onto the weight for a circular search from the mark.
