Home
Guide
Map
Ask Eddie
Search
Reference
Forum
About

A new noise from the outboard can be hard to place, but how often it happens is a good clue. Anything on the crankshaft or flywheel would happen many times a second. A chug every second or so, only in forward gear, points to the gearbox.

In this video Dave's Mercury 125 two-stroke makes a rhythmic chug in forward but not in reverse. After a sea trial with the cowling off, I do the maths. The forward gear has 30 teeth and the pinion 13, and gearboxes use numbers like these, with no common factor, so the same teeth meet as rarely as possible and wear evenly. Here the pinion goes 30 turns before the same two teeth meet again, so at about 2,000 rpm a damaged tooth on each gear would meet about once a second, which is what we heard. When Dave strips the gearbox, the forward and pinion gears both have chipped teeth, and the oil is mostly water. We pull the pinion nut, driveshaft, forward gear and shift parts, counting the ball bearings out of the gear selector.

In the end Dave found a second-hand gearbox and replaced the whole lower unit, which gets you a new water pump, driveshaft and bearings too. The other way is a new set of gears with bearings, fitted as in the gearbox rebuild. There's more on finding water in the oil in water in gearbox.