If the bilge pump is working overtime or the battery keeps going flat, the boat is letting water in somewhere. Start with anything that goes through the hull: the bung and its fitting, the motor's mounting bolts, bilge pump outlets and transducers. Then look for cracks and pinholes.
In this video I go through the ways to find a leak: putting water in the boat (low leaks only, because water is heavy), pressurising a sealed compartment with air, and shining a light through the hull at night. Then I put a little water in the Green Machine, dyed with a litre of antifreeze coolant so any drip is clearly from inside, not moisture trapped under lifted antifoul, and find a drip from an old welded patch under the antifoul. I show a riveted patch that has never leaked and weld up the crack. For more on fixing holes, see repairing an aluminium hull.
Pete's timber boat had a leak through a wormhole. As a stopgap until it can be fixed properly, we slow it down with some Sikaflex and a screw.
