Home
Guide
Map
Ask Eddie
Search
Reference
Forum
About

Paint won't last on rusty steel, so the rust has to be removed or converted first. Sandblasting is the gold standard, but there are other ways to do it yourself. Rust that has eaten deep into the metal needs a welded repair; see repairing a steel hull.

In this video I brush the loose rust and paint off a patch of the trawler, but not back to shiny metal, then brush on a rust converter. Its tannic acid turns the rust into a stable black layer that primer sticks to. Use enough to convert all the rust, but wash off any excess, and leave it 24 hours to see whether it needs another coat.

Phosphoric acid

In this video the new patches on Renko's deck have rusted quickly, so I put phosphoric acid on them. It turns the rust into iron phosphate, which sticks well to the steel, so I only brush off the loose stuff with a hand brush rather than going back to bare metal. Then a temporary coat goes on to stop it rusting until the whole deck is sandblasted and epoxy coated.

Electrolysis

Electrolysis turns rust back into iron rather than removing it, so you lose less metal. I set up a bath of water and washing soda (sodium carbonate), with mild steel anodes around the outside and the part hanging in the middle, powered by a battery on a charger. Getting the wires the wrong way round damages the part. After about a week the trawler's old exhaust flap comes out, and the bare iron left behind needs priming straight away. The bath gives off hydrogen and oxygen, so do it somewhere well ventilated.

Needle gun

In this video I strip the paint and heavy rust off Renko's sides with a needle gun before wet blasting, so the blasting takes less time and less blasting medium. It takes off big, heavy chunks rather than fine dust, so they drop onto a tarp and are easy to clean up instead of blowing away. You could strip all the topsides in a day. The catch is the noise: it's incredibly loud, so I keep it for heavy corrosion and awkward spots.

Wet blasting

Dry blasting makes too much dust to do outdoors, so I set up a wet blasting kit on a pressure washer, with garnet as the blasting medium. I try sucking the garnet straight from the bag and feeding it from a sandblaster pot at low air pressure. There wasn't much difference, so the simple way wins. I also talk about adding Chlor-Rid to the water to take the salts out.