Some jobs can only be done with the boat out of the water, but hardstand time costs money. Do everything you can on the water first, find out what the yard will let you do, and have your parts, tools and consumables ready before the boat comes out. Once it's out, it has to be properly supported, and a boat falling off its stands can kill you.
In this video Renko goes onto a new hardstand, and I make my own boat stands so I can give the borrowed ones back to the marina. They're made from Acrow props: the angled ones are cut at 15 degrees with the base plates welded back on, then each gets a pivoting head with a timber pad to protect the hull. A chain and turnbuckle tie each angled pair together, and they're biased slightly inwards, towards where the hull is getting narrower, so they can't slip. I use six stands where the marina used four, which is safer and lets me move one at a time to get at that bit of the hull.
What the yard will let you do
Renko's first haul out. Marinas are happy to blast and paint a steel boat, but not much else: no grinding and no noise. If you have real steel hull repairs to do, find a yard where you can make noise and dust, and ask exactly what's allowed before you book.
Getting ready for the hardstand
The week before going on the hardstand: working out what needs doing and ordering parts early, so a part that takes five days to arrive doesn't hold you up. I take long extension leads and a ladder, and a good supply of cutting discs, flap discs and wire cups, because a trip to the hardware store wastes hardstand time. Paint chips can't go in the water, so plan how to catch them. And grinding dust left out in the rain turns to rust overnight, so clean up straight away, or you'll be removing rust from the deck.
